Error in boot using USB drive for Fedora?

Error in boot using USB drive for Fedora?

Error in boot using USB drive for Fedora?
Or can you see something like this:
[16.467025] USB 1-2: device not accepting address 2, error – 110
[32.103021] USB 1-2: device not accepting address 2, error – 110
[42.627052] USSB 1-2: device not accepting address 4, error – 110
[47.2221531] [drm] nonveau 0000:02:00.0: Register 0X00004030 not found in PLL limits table

Solution:

1. Go to ‘BIOS Setup’ by pressing DEL, F4 or F2 (Depending on the motherboard of your computer)
2. ‘Advance Bios Features’
3. Check if there is ‘Installer OS Select – Auto’
4. Change ‘Auto’ to ‘Others’
5. Save Changes by pressing F10. 
6. Then reboot your system and use your computer’s built-in function to choose the USB boot device — usually this is a special key you hold down at boot time, such as F12 or F9. Then enjoy!

This little knowledge we uncover thru contributed efforts was made possible with the help extended to us by the manager of Auza.Net.